Nov 20 2025 06:50:48   Available devices received: [{"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 2, "x": 1}, {"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 19, "x": 1}, {"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 4, "x": 1}]
 Nov 21 2025 03:41:50   Serial Error: Write timeout)
 Nov 21 2025 03:42:52   Serial Error: Write timeout)
 Nov 21 2025 03:43:05   Error: controller is not responding to new data requests. Exiting.
Sentry is attempting to send 1 pending error messages
Waiting up to 2 seconds
Press Ctrl-C to quit
 Nov 21 2025 03:48:23   Refreshing dbConfig
 Nov 21 2025 03:48:29   Connection type Serial selected. Opening serial port.
 Nov 21 2025 03:48:35   Connected via serial to port /dev/ttyACM1
 Nov 21 2025 03:48:35   Notification: Script started, with no active beer being logged
 Nov 21 2025 03:48:45   Checking software version on controller... 
 Nov 21 2025 03:48:46   Found BrewPi v0.2.10 build unknown, running on an Arduino Uno with a revC shield on port /dev/ttyACM1

 Nov 21 2025 03:48:46   BrewPi version received was 0.2.10 which this script supports in 'legacy' branch mode.
 Nov 21 2025 03:48:46   Warning: version number of local copy of logMessages.h does not match log version number received from controller.controller version = 1, local copy version = 3. This is generally a non-issue, as thus far log messages have only been added - not changed.
 Nov 21 2025 03:48:47   Bound to TCP socket on port 2666, interface localhost 
 Nov 21 2025 03:48:48   Installed devices received: [{"i": 0, "t": 1, "c": 1, "b": 1, "f": 9, "h": 2, "d": 0, "p": 18, "v": 67.773, "a": "28FFFE02A31704BA", "j": 0.0}, {"i": 1, "t": 3, "c": 1, "b": 0, "f": 2, "h": 1, "d": 0, "p": 6, "v": 0, "x": 1}, {"i": 2, "t": 3, "c": 1, "b": 0, "f": 3, "h": 1, "d": 0, "p": 5, "v": 0, "x": 1}, {"i": 3, "t": 1, "c": 1, "b": 0, "f": 5, "h": 2, "d": 0, "p": 18, "v": 68.225, "a": "28FF6D2DA217055C", "j": 0.0}]
 Nov 21 2025 03:48:48   Available devices received: [{"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 2, "x": 1}, {"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 19, "x": 1}, {"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 4, "x": 1}]
 Nov 21 2025 03:52:51   Serial Error: Write timeout)
 Nov 21 2025 03:54:00   Serial Error: Write timeout)
 Nov 21 2025 03:54:12   Error: controller is not responding to new data requests. Exiting.
 Nov 21 2025 04:13:51   Refreshing dbConfig
 Nov 21 2025 04:13:57   Connection type Serial selected. Opening serial port.
 Nov 21 2025 04:14:05   Connected via serial to port /dev/ttyACM1
 Nov 21 2025 04:14:05   Notification: Script started, with no active beer being logged
 Nov 21 2025 04:14:15   Checking software version on controller... 
 Nov 21 2025 04:14:17   Found BrewPi v0.2.10 build unknown, running on an Arduino Uno with a revC shield on port /dev/ttyACM1

 Nov 21 2025 04:14:17   BrewPi version received was 0.2.10 which this script supports in 'legacy' branch mode.
 Nov 21 2025 04:14:17   Warning: version number of local copy of logMessages.h does not match log version number received from controller.controller version = 1, local copy version = 3. This is generally a non-issue, as thus far log messages have only been added - not changed.
 Nov 21 2025 04:14:18   Bound to TCP socket on port 2666, interface localhost 
 Nov 21 2025 04:14:19   Installed devices received: [{"i": 0, "t": 1, "c": 1, "b": 1, "f": 9, "h": 2, "d": 0, "p": 18, "v": 67.662, "a": "28FFFE02A31704BA", "j": 0.0}, {"i": 1, "t": 3, "c": 1, "b": 0, "f": 2, "h": 1, "d": 0, "p": 6, "v": 0, "x": 1}, {"i": 2, "t": 3, "c": 1, "b": 0, "f": 3, "h": 1, "d": 0, "p": 5, "v": 0, "x": 1}, {"i": 3, "t": 1, "c": 1, "b": 0, "f": 5, "h": 2, "d": 0, "p": 18, "v": 68.225, "a": "28FF6D2DA217055C", "j": 0.0}]
 Nov 21 2025 04:14:19   Available devices received: [{"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 2, "x": 1}, {"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 19, "x": 1}, {"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 4, "x": 1}]
 Nov 21 2025 04:16:28   Serial Error: Write timeout)
 Nov 21 2025 04:16:40   Serial Error: Write timeout)
 Nov 21 2025 04:20:51   Serial Error: Write timeout)
 Nov 21 2025 04:21:19   Serial Error: Write timeout)
 Nov 21 2025 04:22:01   Serial Error: Write timeout)
 Nov 21 2025 04:22:12   Error: controller is not responding to new data requests. Exiting.
 Nov 21 2025 04:28:48   Refreshing dbConfig
 Nov 21 2025 04:28:50   Connection type Serial selected. Opening serial port.
 Nov 21 2025 04:28:52   Connected via serial to port /dev/ttyACM1
 Nov 21 2025 04:28:52   Notification: Script started, with no active beer being logged
 Nov 21 2025 04:29:02   Checking software version on controller... 
 Nov 21 2025 04:29:12   Found BrewPi v0.2.10 build unknown, running on an Arduino Uno with a revC shield on port /dev/ttyACM1

 Nov 21 2025 04:29:12   BrewPi version received was 0.2.10 which this script supports in 'legacy' branch mode.
 Nov 21 2025 04:29:13   Warning: version number of local copy of logMessages.h does not match log version number received from controller.controller version = 1, local copy version = 3. This is generally a non-issue, as thus far log messages have only been added - not changed.
 Nov 21 2025 04:29:15   Bound to TCP socket on port 2666, interface localhost 
 Nov 21 2025 04:29:15   Installed devices received: [{"i": 0, "t": 1, "c": 1, "b": 1, "f": 9, "h": 2, "d": 0, "p": 18, "v": 67.662, "a": "28FFFE02A31704BA", "j": 0.0}, {"i": 1, "t": 3, "c": 1, "b": 0, "f": 2, "h": 1, "d": 0, "p": 6, "v": 0, "x": 1}, {"i": 2, "t": 3, "c": 1, "b": 0, "f": 3, "h": 1, "d": 0, "p": 5, "v": 0, "x": 1}, {"i": 3, "t": 1, "c": 1, "b": 0, "f": 5, "h": 2, "d": 0, "p": 18, "v": 68.111, "a": "28FF6D2DA217055C", "j": 0.0}]
 Nov 21 2025 04:29:15   Available devices received: [{"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 2, "x": 1}, {"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 19, "x": 1}, {"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 4, "x": 1}]
 Nov 21 2025 04:30:13   Serial Error: Write timeout)
 Nov 21 2025 04:30:53   Serial Error: Write timeout)
 Nov 21 2025 04:31:44   Serial Error: Write timeout)
 Nov 21 2025 04:31:58   Error: controller is not responding to new data requests. Exiting.
 Nov 21 2025 04:43:13   Refreshing dbConfig
 Nov 21 2025 05:38:50   Connection type Serial selected. Opening serial port.
 Nov 21 2025 05:39:51   Connected via serial to port /dev/ttyACM1
 Nov 21 2025 05:39:51   Notification: Script started, with no active beer being logged
 Nov 21 2025 05:40:03   Checking software version on controller... 
 Nov 21 2025 05:42:05   Found BrewPi v0.2.10 build unknown, running on an Arduino Uno with a revC shield on port /dev/ttyACM1

 Nov 21 2025 05:42:07   BrewPi version received was 0.2.10 which this script supports in 'legacy' branch mode.
 Nov 21 2025 05:42:10   Warning: version number of local copy of logMessages.h does not match log version number received from controller.controller version = 1, local copy version = 3. This is generally a non-issue, as thus far log messages have only been added - not changed.
Traceback (most recent call last):
  File "/usr/lib/python3.7/runpy.py", line 193, in _run_module_as_main
    "__main__", mod_spec)
  File "/usr/lib/python3.7/runpy.py", line 85, in _run_code
    exec(code, run_globals)
  File "/home/fermentrack/fermentrack/brewpi-script/brewpi.py", line 325, in <module>
    bg_ser.start()
  File "/home/fermentrack/fermentrack/brewpi-script/scriptlibs/backgroundserial.py", line 34, in start
    self.thread.start()
  File "/home/fermentrack/venv/lib/python3.7/site-packages/sentry_sdk/integrations/threading.py", line 54, in sentry_start
    return old_start(self, *a, **kw)
  File "/usr/lib/python3.7/threading.py", line 847, in start
    _start_new_thread(self._bootstrap, ())
RuntimeError: can't start new thread
Error in atexit._run_exitfuncs:
Traceback (most recent call last):
  File "/home/fermentrack/venv/lib/python3.7/site-packages/sentry_sdk/worker.py", line 70, in start
    self._thread.start()
  File "/home/fermentrack/venv/lib/python3.7/site-packages/sentry_sdk/integrations/threading.py", line 54, in sentry_start
    return old_start(self, *a, **kw)
  File "/usr/lib/python3.7/threading.py", line 847, in start
    _start_new_thread(self._bootstrap, ())
RuntimeError: can't start new thread
 Nov 21 2025 05:51:49   Refreshing dbConfig
 Nov 21 2025 05:51:50   Connection type Serial selected. Opening serial port.
 Nov 21 2025 05:51:51   Connected via serial to port /dev/ttyACM1
 Nov 21 2025 05:51:51   Notification: Script started, with no active beer being logged
 Nov 21 2025 05:52:01   Checking software version on controller... 
 Nov 21 2025 05:52:01   Found BrewPi v0.2.10 build unknown, running on an Arduino Uno with a revC shield on port /dev/ttyACM1

 Nov 21 2025 05:52:01   BrewPi version received was 0.2.10 which this script supports in 'legacy' branch mode.
 Nov 21 2025 05:52:01   Warning: version number of local copy of logMessages.h does not match log version number received from controller.controller version = 1, local copy version = 3. This is generally a non-issue, as thus far log messages have only been added - not changed.
 Nov 21 2025 05:52:01   Bound to TCP socket on port 2666, interface localhost 
 Nov 21 2025 05:52:02   Installed devices received: [{"i": 0, "t": 1, "c": 1, "b": 1, "f": 9, "h": 2, "d": 0, "p": 18, "v": 67.324, "a": "28FFFE02A31704BA", "j": 0.0}, {"i": 1, "t": 3, "c": 1, "b": 0, "f": 2, "h": 1, "d": 0, "p": 6, "v": 0, "x": 1}, {"i": 2, "t": 3, "c": 1, "b": 0, "f": 3, "h": 1, "d": 0, "p": 5, "v": 0, "x": 1}, {"i": 3, "t": 1, "c": 1, "b": 0, "f": 5, "h": 2, "d": 0, "p": 18, "v": 67.887, "a": "28FF6D2DA217055C", "j": 0.0}]
 Nov 21 2025 05:52:02   Available devices received: [{"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 2, "x": 1}, {"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 19, "x": 1}, {"i": -1, "t": 0, "c": 1, "b": 0, "f": 0, "h": 1, "d": 0, "p": 4, "x": 1}]